100 Cross Stitch Terms That Every Cross Stitcher Needs to Know

cross stitch grid lines in Easy Count Guideline by A satisfied spirit (source: asatisfiedspirit.com)

Over the last 13 years of cross stitch, I’ve learned a lot of cross stitch specific terms and phrases. I went to talk at a school recently and a lot of teens looked at me with confused looks. Turns out, cross stitch really is like another language. So here are as many terms as I could find that will hopefully help those new to the craft to make heads or tails of what’s going on.


BAP – Big Ass Project – Can be used in reference to epic cross stitches, or just large full coverage cross stitches like HAEDs.
FO – Finished Object – A cross stitch pattern that has been finished as per the pattern. Patterns with backstitch are sometimes photographed before backstitch and after, with the FO tag accompanying the later.
FFO – Fully Finished Object – Similar to an FO, but also framed.
HAED – Heaven And Earth Designs – A specific brand of cross stitch patterns. They supply large full covereage cross stitch patterns with only full stitches.
LNS – Local Needlework Store – This is in reference to a brick and mortor store somewhere close to the purchaser. Tends to be more expensive, but you can pick up last minute supplies.
ORT – Other Random Threads – Short ends of threads cut off when finishing with a length of thread. Often collected in ORT jars.
RAK – Random Act of Kindness – Cross stitchers may give away surplus threads, aida and patterns on message boards and cross stitch forums. Nothing is expected in return.
SALStitch-A-Long – A pattern that is given bit by bit, to be stitched with other cross stitchers.
UFO – Unfinished Object – An unfinished cross stitch project that is no longer worked on.
WIP – Work In Project – An unfinished cross stitch project.


Aida – A starched fabric most commonly used for cross stitch. Has small holes allowing you to form an X with your thread in a gridded way. Often count in counts from 11 to 28.
Band – A strip of fabric, usually aida, 1 inch or 2 inches tall with an ornamental border on top and bottom.
Binca – A fabric similar to aida, but firmer and tends to come in only 6 and 11 count. Fabric stores may incorrectly refer to aida as binca.
Brittany Lugana – A commonly used evenweave fabric from Zweigart. It comes in 28 count.
Evenweave – A softer fabric used for cross stitch. The fibers of the thread are placed differently to aida and a different stitching technique must be used.
Linen – Evenweave fabric made from flax, a natural fiber. Cross stitches will not lay flat on this fabric.
Magic Guide Fabric – An aida fabric from DMC with blocks of 10 stitches marked out with colored threads. The threads marking the blocks change color once wet.
Murano – A commonly used evenweave fabric from Zweigart. It comes in 32 count.
Perforated Card – Similar to plastic canvas, but made from one sheet of card with holes cut into it.
Plastic Canvas – A sheet of plastic which allows cross stitch to be stitched onto it. It can come in a style emulating aida, or a singular sheet with holes cut.
Pre Gridded Aida – An aida fabric with threads marking ten stitch blocks. The threads marking the blocks change color once wet.
Soluble Canvas – A plastic sheet with holes cut out that can be used as a guide to cross stitch onto fabrics without a grid. The canvas dissolves in warm water.
Waste Canvas – An even weave fabric that has a lower level of starch. Use to stitch onto other fabrics without a grid, and then removed by pulling the fibers out one by one.

Fabric Terms

1 over 1 – A standard cross stitch where each cross stitch is made up using the least amount of holes within a griddedn fabric.
2 over 2 – A cross stitch that is double the size of a 1 over 1 cross stitch on gridded fabric. Often used in higher count evenweave. An evenweave with 32 count 2 over 2 will create a 16 count cross stitch.
Count – A number that refers to the amount of cross stitches you can stitch into the fabric in one line using a 1 over 1 technique within 1 inch. The standard count is 14, but comes in 6, 11, 14, 16, 18, 20, 22, 16, 28 and 32.
Gridding – A way of marking out blocks of 10 stitches onto the fabric before stitching. This avoids the complications of counting incorrectly.
Warp – The threads that run horizontally through your fabric.
Weft – The threads that run vertically through your fabric.

Thread Terms

Bobbin – A small plastic or paper shape you can hold your thread on. Allows for easier thread storage.
Bobbin Box – A box used to store embroidery threads on bobbins.
Embroidery Thread – Thread used in cross stitch. Made up of 6 floss strands loosely spun together. Embroidery floss is broken down and not stitched with.
Étoile – A type of thread from DMC. Contains a small bit of glitter in the thread to help it shine.
Floss – The strand of embroidery floss used to actually stitch.
Light Effects – A type of thread from DMC. Speciality threads that are neon, glow in the dark, metallic or wired.
Skein – An 8m length of embroidery thread. Often the way most will buy embroidery thread.
Variations – A type of thread from DMC. The strand of thread changes color through its length in a repeating pattern.
Variegated – A type of thread from DMC. The strand of thread changes intensity of color through its legth in a repeating pattern.
Perle – An embroidery thread mostly used for embroidery, but can be used with cross stitch. This thread cannot be seperated into floss and must be stitched with whole.


Aperture card – A card with a window cut out allowing you to place a completed cross stitch behind it. This allows you to either make a cross stitch card or to help with framing your work.
Beading Needle – A needle that holds a bead and helps when adding beads to your pattern.
Bobbin Winder – A small tool that allows you to take the thread off the skein and place it onto a bobbin. Made to sit on the side of a bobbin box.
Bobbin Ring – A large metal ring that allows you to hold bobbins eye the hole at the top. Used for storage of bobbins used on a current project, and not long term storage.
Color Card – A flyer with either printed examples of a full thread range, or samples of the threads to help you pick colors when designing patterns.
Cross Stitch Needle – An alternative name for a tapestry needle.
Embroidery Hoop – A wooden or plastic hoop used to hold your fabric taut so you can cross stitch onto it neatly.
Embroidery Scissors – Small sharp scissors that are used to cut threads. It can come in many forms.
Floor Stand – A wooden or metal stand that allows you to clip a cross stitch hoop or frame to it allowing you to stitch “hands-free”.
Frame – A wooden frame that allows you to hold your fabric taut so you can cross stitch onto it neatly. Larger than a hoop.
Fray Check – A glue applied to the edges of the fabric that stop it fraying or breaking apart.
Lap Stand – A small stand that allows you to clip a cross stitch hoop or frame to it allowing you to stitch “hands-free”. You place the foot of the frame under your leg and sit on top of it.
Needle Eye – The hole at the top of a needle that you place your thread through.
Needle Minder – A small magnetic object you can attach to either side of your fabric that hold your needle either whilst not stitch, or using the parking method.
Needle Threader – A small tool that helps you push the floss through the eye of a needle. It comes in many types.
Q-Snap – A cross stitch frame made out of plastic tubes/PVC pipe that holds your fabric taut so you can cross stitch onto it neatly.
Seam Ripper – A sewing tool that helps with the removal of stitches by cutting the threads.
Scroll Frame – A wooden frame that allows you to hold your fabric taut so you can cross stitch onto it neatly. It allows you to scroll through a large piece of fabric so you don’t need to keep changing its position. Different types can either be sewn or clipped into the frame.
Stork Scissors – A type of embroidery scissors shaped like a stork bird. This is a traditional design that helps you make cuts closer to the body of your work.
Table Clamp – A small clamp that holds onto your table that allows you to clip a cross stitch hoop or frame to it allowing you to stitch “hands-free”.
Table Stand – A small wooden stand that allows you to clip a cross stitch hoop or frame to it allowing you to stitch “hands-free”.
Tapestry Needle – A blunt-tipped hand sewing needle with a long eye. Used specifically for cross stitch. Comes in a variance of sizes.
Thread Conditioner – A wax substance that helps threads go through fabric, stops it fraying and stops oils getting to the threads.


Backstitch – A running stitch that lied on top of the cross stitches to help define the details of the pattern.
Colonial Knot – A small knot made by wrapping the thread around your needle. Used to add extra details to your pattern. Easier than a french knot.
French Knot – A small knot made by wrapping the thread around your needle. Used to add extra details to your pattern.
Full Cross Stitch – A standard cross stitch.
Half Stitch – Half of a full cross stitch, just one stitch in a \ or / direction.
Petit Point – A full cross stitch that takes up the space of 1/4 of a normal stitch. On 14 count fabric a petit point stitch would be in 28 count.
Quarter Stitch (1/4 Stitch) – A quarter of a full cross stitch. Made up of a stitch in a \ or / direction only covering half of its full length.
Three Quarter Stitch (3/4 Stitch) – Three quarters of a full cross stitch. Made up of a stitch without one quarter stitched, leaving a small stitch in a \ or / direction missing.


Blending – A mix of different colors of types of threads stitched at the same time with the same needle. Used to create a new color, add detail, or help blend two different color blocks on patterns.
Confetti stitches – Single stitches that are spread around your pattern, or are not located near any other stitching in non-full coverage patterns.
Cross Country – Stitching one color in your pattern at your time, requiring you to move all-around your pattern.
Danish cross stitch – A form of stitching where you complete only half of each cross stitch before moving onto the next stitch. Once a row has been completed you go back on yourself and complete the stitches.
English cross stitch – A form of stitching where you complete each cross stitch in full before moving onto the next stitch.
Frogging – The removal of stitches as they were incorrectly placed.
Parking – A method of keeping active threads on your cross stitch. You stitch with one needle, and then attach it to the side of your work without removing the thread. You start on another color and then go back to the ‘parked’ thread you were using previously.
Railroading – A stitching method that allows your thread to lay flat and look neater. Often expected in cross stitch competitions. A tool called a railroad dowel can help with this technique.
Loop Method – Alternatively called the Knotless Method. A way of starting your thread. You take one length of thread and fold it in half. Thread both loose ends of the floss into the needle eye and start your stitch from back to front. When placing the stitch from the front to back, catch the loop at the back of the work.
Waste Knot Method – A way to start your thread. Tie a knot at the end of your thread, and insert the thread from the front to the back a few stitches into the line of stitches you wish to create. Start stitching as planned. Snip off the knot once done and the thread should be held by your new stitches.


Anchor – Thread manufacturer. The second most common threads used for cross stitch.
DMC – Thread manufacturer. The most common threads used for cross stitch.
Elbesee – Embroidery stand/hoop manufacturer.
Fiskars – Scissor manufacturer. Simply designed scissors for various purposes, including fabric and thread cutting.
John James – Needle manufacturer. The most common needle supplier for cross stitch and embroidery.
Milward – Needle manufacturer. Also supply scissors, hoops and other supplies.
Siesta – Embroidery stand/hoop manufacturer. Supply smaller hoops such as 3 inch hoops.
Thread Heaven – A brand of thread conditioner that is no longer in production.
Zweigart – Fabric manufacturer. The inventor of aida, and the most used aida and evenweave supplier in cross stitch.

Other Terms

Counted Cross Stitch – The standard form of cross stitch where one follows a pattern and uses a plain gridded fabric to recreate the design.
Markup App – A program used on devices like phones and iPads that allow you to mark which stitches of a cross stitch pattern you have completed.
Motif – A small image that makes up a part, or the whole, of a cross stitch pattern. An example is a singular bird or a Christmas Tree.
PDF – A file type that digital patterns come in. It can be opened by most phones and computers without additional software.
Sampler – A traditional form of cross stitch made up of a varied set of stitches. Often refers to a cross stitch with text and imagery.
Stamped Cross Stitch – A counted cross stitch with fabric pre-printed with the pattern. You stitch on top of the fabric and the color washes out once wet.
Stash – The mass of cross stitch supplies you have but aren’t currently using.
Symbol – The small icon used in cross stitch patterns used to highlight a specific color thread.
#WIPwednesday – A common phrased used online where stitchers share images of works in progress. It should only be used on a Wednesday.
Are there any other terms you need to be explained? Leave a comment below and I’ll update the list!


Consider following us on social!

  Instagram   Twitter   Facebook   Pinterest   DeviantART   RSS Feed

Rorschach Ink Blot Test Cross Stitches by Lord Libidan

Rorschach Ink Blot Test Cross Stitches by Lord Libidan

Rorschach Ink Blot Test Cross Stitches by Lord Libidan
Rorschach Ink Blot Test Cross Stitches by Lord Libidan

Title: Rorschach Ink Blot Test Panels 1 to 6
Date Completed: October 2019
Design: Lord Libidan
Count: 14
Canvas: White
Colours: 4
Pop Culture: Noir
I design patterns for the Xstitch magazine, and this issue the theme was noir. I know the themes are based on general terms to help promote a more varied selection, but I also write for the magazine, and in this issue, I spoke about black. So of course, my mind went to black for the stitch too.
But I couldn’t find anything I liked. I tend to stitch on black a lot, but making a dark black stitch is hard, and frankly, not very interesting. But then I happened across a set of ink blot tests in a toy store. They were full of color, but I loved the idea of a Rorschach ink blot test. Not only were they (mostly) black, but they were a pseudoscience that was very of the noir movie aesthetic and time period. It just worked.
The patterns didn’t really work though. My first idea was to pick just one and make it huge, but as you guessed, it was a lot of black. So I cut it down in size. But this meant it was not only non-symmetrical, a key feature of the ink blots, but it was full of shades. These shades were OK, but the way the DMC colors work, the dark colors were hued. They had blues in, or purples and they looked wrong. Finally, I made them all, pixel by pixel to get it perfect. I had to make a decision early on, with ink blot 2, as it had red in. Whilst this still fitted with the theme, I just felt it was better as black.


Consider following us on social!

  Instagram   Twitter   Facebook   Pinterest   DeviantART   RSS Feed

How To Combine Cross Stitch And Interior Design

Large Cross Stitch Art in a study (Source: CBC.ca)

You can get cross stitch inspiration pretty much anywhere, but after hitting a few dozen massive projects, you sometimes want a change. And whilst looking for unique cross stitch ideas I came across people who mixed cross stitch with interior design.
Unlike other projects, which are destined to go into cross stitch storage, by making something to do in your house, you’ll always be able to enjoy it.

Peg Board

The easiest way to get into interior design cross stitch, or super massive cross stitch for that matter, is peg board. It comes in loads of different sizes and its rather cheap. You can paint it, stain it, or cross stitch on it. It might not be the most traditional cross stitch fabric, but it sure works for a great addition to any room. You can also turn it into things like stools for an added factor.

Large Cross Stitch Art in a study (Source: CBC.ca)
Large Cross Stitch Art in a study (Source: CBC.ca)

Ikea Hacks

If you don’t want to make something the the wall however, you could always pop down to your local Ikea. Not only is it stocked full of items with regular holes in them (think chairs, floor mats, lamps, etc), but there are items made from peg board, meaning you can have a functioning bit of furnature with a sweet cross stitch edge.

Ikea desk chair cross stitch hack (Source: Pinterest)
Ikea desk chair cross stitch hack (Source: Pinterest)


How about something a little more refined? By ditching the needle and thread and picking up a paint brush you can add a cross stitch design to literally anything that takes paint. You can find a great guide from homeheartcraft if you’re interested.

Painted Wall Cross Stitch Rose (Source: homeheartcraft.com)
Painted Wall Cross Stitch Rose (Source: homeheartcraft.com)


But just because the inside of your home can be cross stitched up, doesn’t mean it has to stop there. By using gardeners yard you can use things like fences to add cross stitch characters. It’s actually been seen in big cities before with the illegal cross stitch movement. Maybe its safer to stick to your own garden though.

Pacman Cross Stitch Graffiti in Milan by Miss Cross Stitch (source: sayraphimlothian.com)
Pacman Cross Stitch Graffiti in Milan by Miss Cross Stitch (source: sayraphimlothian.com)

Cross Stitch On Anything!

However, let’s be honest here, you can actually cross stitch on anything, and we mean anything. Cross stitching can be done with something called waste canvas, or you can even cross stitch without waste canvas by drilling holes. The great thing about this is that you aren’t limited by size or count, you can do your own thing.

broderie-objet-metal-16 by Severija Incirauskaite (source: mrxstitch.com)
broderie-objet-metal-16 by Severija Incirauskaite (source: mrxstitch.com)

Frame It!

We however, quite like the old fashioned framed cross stitch. You can get really inventive with framing with bright matting and frames, and as it goes up in your own home, it doesn’t matter if anyone else likes it or not. You could even not put glass in your cross stitch frame.

Pacman screenshot cross stitch in frame by gmatom (Source: reddit)
Pacman screenshot cross stitch in frame by gmatom (Source: reddit)


Consider following us on social!

  Instagram   Twitter   Facebook   Pinterest   DeviantART   RSS Feed

Tips For Travelling With Your Cross Stitch

Sewing on a plane (source: twitter)

On of the most googled questions about cross stitch is still about taking it traveling. And whilst there are a whole host of people giving advice on taking cross stitch needles on planes, actually taking it is a whole different thing.
You have to think about size of project, stuff to bring, how much space you’re going to have, how to keep your work from getting dirty, and making sure you don’t loose your needle! So we’ve decided to give you a run down on the best tips for travelling with your cross stitch.

Sewing on a plane (source: twitter)
Sewing on a plane (source: twitter)

Can You Take Cross Stitch Supplies On A Plane?

Let’s get the biggie out the way first; yes, you can take your cross stitch supplies on a plane.

You may place your knitting needles and needlepoint tools in carry-on or checked baggage.

TSA Official Guidelines

That said, you should still consider taking something like snip scissors as sharp and pointed scissors can cause delays at the airport.
So, what tips can I give you?

Don’t Take Something You’ll Miss

Let’s start with a tip that’ll probably put you on a downer right away; don’t take something you care about. Being super realistic, taking cross stitch travelling increases the likelihood of it getting dirty, damaged or even lost, by a considerable amount. Don’t take that heirloom piece that’s been in your family for 30 years; you’re asking for trouble.

Take A Smaller Project

That said, I would also suggest taking something small. This actually has three points to it. The first reflects the point above, take a small travel project, that isn’t your main piece, but one that’ll keep up your interest during travel.
Secondly, depending on your method of travel, space might be an issue. On planes, you rarely have enough space to reach out your arm, and no one will appreciate you trying it with a needle hanging off the end, even if it is a tapesty needle.
Thirdly; how are you going to take it with you? The is simply no way you can fit the 2 meters long epic Pokemon generations cross stitch with you. Smaller will help you here.

Pack A Project Bag

Now that you’ve picked a smaller project, let’s think about actually taking it somewhere. So you need a place to store it. The first thing I would suggest is getting a cross stitch travel kit. As per our cross stitch gift guide you can pick one up for about $30, including all needles, snip scissors, a couple of bobbins, magnet, etc.
Secondly, you need a project bag. This can pretty much come in any form, from a resealable food bag to a handbag, but so long as its clean, and tan store your cross stitch; it’s worth it. Just make sure you don’t chuck the rest of your travel gear in the bag too; it’s for cross stitch only.

Altoids Tin Travel Cross Stitch Kit (Source: red-handledscissors.com)

Put Your Hoop On Backwards

This is where we get onto the slightly weird things; we’re going to suggest you put your cross stitch in the hoop backwards. Yes, backwards. Normally you place the cross stitch on the outside, however when traveling this area will rub on the bag, possibly getting your work dirty. But by flipping the cross stitch to the inside of the hoop, you save yourself the possibility of dirt and damage.

Take A Reading Light

Finally, we suggest taking a light. It doesn’t have to be a fancy day light bulb or anything, but taking an additional light, even if its a cheap reading light, will help you in the darker moments of travel…


Consider following us on social!

  Instagram   Twitter   Facebook   Pinterest   DeviantART   RSS Feed

Great Cross Stitch Gifts Under $25/£20

Cross stitchers buy threads in their ever reaching aim to own all 500 DMC threads, we buy aida and other cross stitch fabrics through the year, but the little things that don’t cost the earth and are super useful never seem to get purchased. So why not spend a little on yourself ($25 or £20) and improve your cross stitch game.

Aida Identification Cards – from $5

Cross Stitch Gauge and Rule by Yarn Tree (Source: Stitched Modern)
Cross Stitch Gauge and Rule by Yarn Tree (Source: Stitched Modern)

When it comes to sheer usefulness of cross stitch tools, an aida identification card, or aida gauge is right up there. Many people are unsure if aida gauges are worth getting and so don’t buy one themselves, even though they are frankly one of the most used things in my cross stitch kit.

Frogging Scissors – from $5

lift-n-snip-scissors with close up (source: amazon)
Making a mistake in cross stitch sucks, but its a pain that cross stitcher knows. However, there is a tool that makes frogging easy. It might not be the most glamorus pair of embroidery scissors, but it sure is one of the most useful.

Scissor Sheaths – from $5

Scissor Sheaths (Source etsy.com)
Scissor Sheaths (Source etsy.com)

From scissors to scissor sheaths. Every single cross stitcher probably owns multiple sets of embroidery scissors and like most, one is always kept handy, out on display, getting stuck into things/people all the time. So to keep them safe, and sharp, scissor sheaths were invented. Coming in a whole host of designs, they’re sure to brighten anyone’s cross stitch kit.

Easy Guide Needles – from $7

Easy guide cross stitch needles (Source: Etsy.com)
Easy guide cross stitch needles (Source: Etsy.com)

Not much happens in the world of cross stitch and tapestry needles, however one recent new addition, the easy guide needle, is like a breath of fresh air. By adding a small ball to the tip of a sharp needle, you keep the blent edge, but get a better point for more controlled stitching.

Canary Micro Snips – from $7

Canary Micro Scissors in a palm (Source: beyondmeasure.com)
Canary Micro Scissors in a palm (Source: beyondmeasure.com)

Stepping up the price slightly, we reviewed these micro snips from Canary that are a fantastic pair of finger scissors, which are not only fast and easy to use, but are fully TSA compliant for plane travel and can even be attached to your keys, so you’re never away from a pair of scissors!

Thread Shade Chart – $20

We simply cannot advise every cross stitcher out there to get a shade card enough. They are a super valuable tool. Sure, we have a copy of the DMC shade card on our site to see at any time, but there is nothing like seeing the real threads sat next to each other, to get the best out of your threads, and mae the best patterns. Still aren’t convinced? Check out our post on why you need a DMC thread card.

DMC complete thread card (small)
DMC complete thread card


A Good Cross Stitch Book – $20 to $25

Criss crossing paris book by fiona sinclair and sallyanna hayes cover small (source: amazon)
Criss crossing paris book by fiona sinclair and sallyanna hayes cover small (source: amazon)

With cross stitch patterns being found online in their masses in places like Etsy, however that doesn’t mean those are where the best patterns are. In fact, cross stitch pattern books are still on the rise, and are normally the only places you can get official patterns from people Like Disney. You check our run down of the best cross stitch books out on the market to find one for you.


Consider following us on social!

  Instagram   Twitter   Facebook   Pinterest   DeviantART   RSS Feed

The Most Under Rated Cross Stitch Tool

Round Nose Jewelry Pliers (Source: kernowcraft.com)

I have a secret I must share with you all. Whenever someone shows me a cross stitch, I ALWAYS take a peek at their cross stitch kit. In fairness, this has helped me in the past, without it I wouldn’t be using snip scissors or a cross stitch magnifier, and after all, its hardly like a ladies handbag.
But today, I don’t want to talk about someone new, I want to talk about the thing everyone overlooks; pliers and tweezers.
Now those who have one of these in their kits will probably be nodding away at just the slightest mention of them, but those people are also the ones that never talk about them. The rest of you are probably reading this in sheer confusion at what seems to be an electrician’s tool, but trust me when I say this; I think pliers and tweezers are the most underrated tools in a cross stitcher’s arsenal.

Round Nose Jewelry Pliers (Source: kernowcraft.com)
Round Nose Jewelry Pliers (Source: kernowcraft.com)

Let me start by saying that these aren’t your run of the mill beefy pliers used to bend metal stakes or whatever (can you tell I don’t do DIY?) these are more petite. In fact, there are loads and loads of craft pliers out there for specific purposes. I personally choose a pair of round-nosed jewelry pliers (more on why later), but you can also get tweezers, in metal or plastic, and in fact, there are pairs of tweezers with magnifying glasses too!

What Are They Used For?

So let’s finally let those confused readers in on the secret. Cross stitchers can use pliers and tweezers in three main ways. The biggest thing for me is pushing through threads.
The way I was taught to end a thread, like many of you, was by pushing the needle through the back of the stitched threads. Once done, you pull it out and snip the end off. Or at least, that’s how most guides SAY it should be. In reality, the force of getting that thread out is probably the most strenuous thing any cross stitcher will do in the hobby. This is multiplied about one million times when using plastic canvas too.
This is where these tools come in really handy. By gripping the end of the needle you can reduce the overall force you need to apply and the needle will pop right out. We suggest round nosed pliers, or plastic tweezers if you’re going to do this, as the sharp edges of metal tweezers and straight pliers can damage the needles. And whilst I do say you should throw out that old needle I don’t think you should throw needles away all the time…

How to end a cross stitch thread illustration (source: DMC)
How to end a thread (source: DMC)

The second use for these is frogging. Yes, the dreaded frog. I’ve previously spoken about tools that make frogging easier, but tools like tweezers are a good alternative. Unlike a pair of scissors or seam ripper, you can unpick the threads without cutting them.
Equally, they are good at picking out stray pieces of threads that might have developed (I swear some threads fluff more than others), alongside picking out any dirt that might get on your work.

Should You Get Them?

Well, if you haven’t already; yes! I know they might not be the fanciest of cross stitch tools, and they sure don’t make things more fun, but they will make things easier for you.


Consider following us on social!

  Instagram   Twitter   Facebook   Pinterest   DeviantART   RSS Feed

The Orville Blueprint Cross Stitch by Lord Libidan

The Orville Blueprint Embroidery by Lord Libidan

The Orville Blueprint Embroidery by Lord Libidan
The Orville Blueprint Embroidery by Lord Libidan

Title: The Orville Blueprint
Date Completed: May 2020
Design: Lord Libidan
Count: 14
Canvas: Black
Colors: 3
Pop Culture: The Orville
Like many people, my favorite cross stitch changes a lot. It tends to be the last one I’ve stitched or the last big one at least. However for some time now, it remained as just one. My Star Trek Voyager Blueprint/LCARS cross stitch completed over a year ago. I think there were a few reasons for this. I’d worked on LCARS cross stitch before for both my Star Trek cross stitch book and my LCARS what happens on the holodeck cross stitch however I was never really sold on either of them. So when I was able to do another LCARS cross stitch, with a realistic screen, I really felt I’d captured its essence. It felt like I’d managed to complete it in a way that really looked right.
I think part of this was I was able to take a real screen (or my impersonation of one anyway). What I didn’t realize at the time is that I liked the UX (user interface) of the LCARS system, and liked the actual screens themselves. When I started stitching my matrix code cross stitch I really understood this and wanted to do more. This is where the Orville project started. I was watching the most recent Star Trek and had heard of The Orville is Star Trek-like, and thought, why not? I gave it a try, and frankly, I think it’s better than Star Trek Discovery. But there was a screen that kept coming up. I won’t spoil why, but a main character is often shown, and he’s a science officer. His screen on the deck is in front of him and clearly visible from the camera angle. Normally I would ignore this, but it had an element at the bottom that looked a lot like a macOS dock. Needless to say, I wanted to do something with it.
The Orville Set Photos - Science Officer Screens on the Main Deck (Source: Wikipedia)
The Orville Set Photos – Science Officer Screens on the Main Deck (Source: Wikipedia)

The second thing I noticed about the computer screen was the big old starship blueprint right in the center. It was VERY similar to my Star Trek one, and I just had to take that element as well, after all, I love blueprints. As you can probably tell from my lightsaber blueprint, ZF-1 Blueprint and Metroid Suit blueprint. But all of those are real blueprints. I wondered how a science officer would look at the ship, and wondered if I could make it more… real. I threw some ideas around, but the original image formed most of my plan, with overlays and more detail on science elements, and little in the way of room detail.
This also allowed me to do the same thing I had with my Star Trek cross stitch, and that was backstitch variance. What do I mean by that? Well, basically the number of threads when doing backstitch. By using three sometimes, 2 others and 1 for fine detail you can create a design that looks fairly plain from a distance, but then as you come closer gives you more and more detail. Unlike the Star Trek blueprint, the Orville’s computers mostly use blue, so this became really important.
So, I started making a pattern. It wasn’t a cross stitch pattern that took me 100 hours, but it sure took a long time. I tried adding the original MacOS dock style thing, but it just didn’t work. However, I came up with about 30 inspiration shots from the show, including this one, and knew there were elements I could add. I put everything together, and finally got stitching.
The Orville Screenshot - Computer Screens (Source: Google Images)
The Orville Screenshot – Computer Screens (Source: Google Images)

This is where I would normally stop, showing you the complete thing. But as I stitched, the less sold on the idea I was. Looking back, the whole reason I wanted to stitch this was the macOS style screen, that I failed to make in the pattern. Then, on top of this, is the fact that I had just completed my Futurama ship blueprint embroidery and was about to start on another one (more on that once I’ve finished it). This pattern just didn’t click in the way those did. So I changed the pattern while stitching to remove the outside, leaving just the ship itself.


Consider following us on social!

  Instagram   Twitter   Facebook   Pinterest   DeviantART   RSS Feed

Consider following us on social!

  Instagram   Twitter   Facebook   Pinterest   DeviantART   RSS Feed

How to Finish Plastic Canvas Cross Stitch

The different types of plastic canvas cross stitch fabric (source: thesprucecrafts.com)

If you’ve ever wanted to dabble in cross stitch on plastic canvas you probably did exactly the same as me, and countless others; you started it. So long as you’ve not thrown it at the wall in hatred, you then get to the end of the project, and a simple question is asked: “How do I finish this thing?”
Turns out there are actually a few ways, and you can turn your creations into keyrings, pendants, needle minders, magnets, badges, pins, earrings and more! So we’ve going to round up the best ways to finish off your plastic canvas so you can make the most of your cross stitch, regardless of what type of plastic canvas you’ve used.

Back Stitch The Edges

Great for:

  • Earrings
  • Keyrings
  • Needle Minders/Magnets
  • Pendants

Bioshock Infinite Bird Cage Key Cross Stitch By Lord Libidan
Bioshock Infinite Bird Cage Key Cross Stitch By Lord Libidan

In my mind, this is the way I like to finish off plastic canvas. The main reason is that it avoids the issues that overcasting the edges can bring (we’ll get onto that later), and depending on your project, its probably the easiest way to finish it. In short, you need to backstitch around the edges. This, in essence, is all it is, but by combining it with a few other things you can make some really awesome projects.
The first thing to do is back it with the same cross stitch. You need to swap the pattern over (if it’s not symmetrical) but by doing this you can make keyrings, earrings, tags and more as both sides might be seen. A good example of this is my Bioshock Infinite Bird Cage cross stitch where I took the idea a little further and changed each side ever so slightly.
However, if you don’t see the back (like a magnet, pendant or needle minder) you can simply backstitch an unstitched piece of plastic canvas to it. The advantage here is that the back of your work doesn’t get damaged, and you can slip in a magnet. This means the magnet never touches your work (if you’re making a needle minder) or the fridge itself, which is good as neodymium magnets can stain aida.

Overcast The Edges

Great for:

  • Pins
  • Badges

Monkey Island Cross Stitch Keychain by Lord Libidan
Monkey Island Cross Stitch Keychain by Lord Libidan

The other alternative for finishing plastic canvas is overcasting the edges of your work. This protects the raw edge of the plastic canvas, but in turn, also adds another layer of thread (roughly the same width as a whole stitch) along the edge. You can work this into your design if you need a black edge, but can sometimes cause the great cross stitch to be lost.
But, it has lots of advantages too. Namely, you can back your work. I would suggest felt as it’s easy to cut, soft to the touch and easy to sew. You can cut out hole and mount a pin behind it too allowing you to change your project into a badge or pin.


Consider following us on social!

  Instagram   Twitter   Facebook   Pinterest   DeviantART   RSS Feed

Futurama Planet Express Ship Blueprint Embroidery by Lord Libidan

Futurama Old Bessie Blueprint Embroidery By Lord Libidan

Futurama Old Bessie Blueprint Embroidery By Lord Libidan
Futurama Old Bessie Blueprint Embroidery By Lord Libidan

Title: Old Bessie Futurama Blueprint
Date Completed: April 2020
Design: Lord Libidan
Count: 14
Canvas: Green
Colors: 2
Pop Culture: Futurama
When it comes to blueprints, I’m sold. I’ve made a light saber blueprint cross stitch, a fifth element gun blueprint cross stitch and loads of others. So when I started watching Futurama again (the best cartoon ever by the way) I started getting itchy to do a cross stitch. Then, when watching an episode where the ship gets dismantled (screenshot below), I knew I had to do a blueprint of the ship.
Futurama Dismantled Ship (Source: theinfosphere.org)
Futurama Dismantled Ship (Source: theinfosphere.org)

The thing that makes it so perfect is that the ship is constantly changing, you see in almost every room, yet there aren’t any plans. Others have put things together in the past, but I wanted to do my own take. In my previous blueprints, I had only shown the inside or the outside, but with the ship, I really wanted to combine the two, so I have a cutaway style blueprint.
In my research I found a great poster by Volpin Props, and whilst the image was rather small (the quality below is the best I could find), I based my blueprint on it. I also threw in loads of little details the Volpin Props one didn’t have, things that you only pick up on if you’re a Futurama fan, much like the Star Trek Voyager Blueprint cross stitch did. What makes this even better is that much like Volpin props I’ve hidden most of these details away in a Futurama language you need to translate.
Planet Express Blueprint by Volpin Props (Source: volpinprops.com)
Planet Express Blueprint by Volpin Props (Source: volpinprops.com)

This wasn’t as easy as I had planned, however. Much like my Matrix code cross stitch I needed to recreate a whole language in tiny form. The original alien language that Volpin props used was way too hard to convert, so I changed it for the newer alien language Futurama uses (which is much more complicated to translate).